Viessmann VD2 Series Instructions d'exploitation

Naviguer en ligne ou télécharger Instructions d'exploitation pour Chauffe-eau et chaudières Viessmann VD2 Series. Viessmann VD2 Series Operating instructions Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
VITOCONTROL-S, VD2/CT3/CM2
Operating Instructions
and User’s Information Manual
Vitocontrol-S, VD2/CT3/CM2, Model 300-K, MW1
Outdoor-reset logic digital cascade control
Certified as a component part
of Viessmann boilers only
Please file in Service Binder
5351 341 v1.2 05/2012
Vue de la page 0
1 2 3 4 5 6 ... 35 36

Résumé du contenu

Page 1 - Operating Instructions

VITOCONTROL-S, VD2/CT3/CM2Operating Instructionsand User’s Information ManualVitocontrol-S, VD2/CT3/CM2, Model 300-K, MW1Outdoor-reset logic digital c

Page 2 - The main controls

Ready for operation10Selecting the heating program (winter, summer)Vitotronic 100, GC1Select the required heating programwith the , or button.When pre

Page 3 - Information

Ready for operation11Selecting the heating program (winter, summer)Vitocontrol-S, VD2/CT3/CM2In the ”Central heating and domestic hot water” heating p

Page 4

Ready for operation12Setting the party modeVitocontrol-S, VD2/CT3/CM2Switch on the party mode when you require central heating and domestic hotwater (

Page 5 - Important Precautions

Ready for operation13Activating the energy saving modeVitocontrol-S, VD2/CT3/CM2The energy saving mode is only possible in the ”rw“ heating program. S

Page 6

Switching on and off14Starting up the heating systemVitocontrol-S, VD2/CT3/CM2The initial start-up and matching of the control unit to local condition

Page 7

SettingsSettings15Changing the boiler water temperatureVitotronic 100, GC1In a multi-boiler system with the Vitocontrol-S, VD2/CT3/CM2, the boiler wat

Page 8

Settings16Selecting the time programs(continued)Vitocontrol-S, VD2/CT3/CM2Changing and scanning the time program for central heatingTime Prog. Central

Page 9

Settings17Selecting the time programs(continued)Vitocontrol-S, VD2/CT3/CM2Changing and scanning the time program for central heating (continued)To exi

Page 10 - Ready for operation

Settings18Selecting the time programs(continued)Vitocontrol-S, VD2/CT3/CM2Changing and scanning the time program for domestic hot water heating and th

Page 11 - Reduced room temp

Settings19Selecting the time programs(continued)Vitocontrol-S, VD2/CT3/CM2Changing and scanning the time program for domestic hot water heating and th

Page 12 - Setting the party mode

Introductory information2For your safetyPlease follow these safety instructions closely to avoid the risk of injury to persons and damage to property.

Page 13 - Energy saving mode

Settings20Selecting the time programs(continued)Vitocontrol-S, VD2/CT3/CM2Changing and scanning the time program for domestic hot water heating and th

Page 14 - Switching on and off

Settings21Changing the domestic hot water temperatureVitocontrol-S, VD2/CT3/CM2In a multi-boiler system the Vitotronic 100, GC1 is without function. T

Page 15 - Selecting the time programs

Settings22Setting the energy saving mode for the holiday period(continued)Vitocontrol-S, VD2/CT3/CM2Departure dateFr1. Open the cover on the programmi

Page 16

Settings23Resetting the date and timeVitocontrol-S, VD2/CT3/CM2The time and date are preset in the factory and can be changed manually.There is no nee

Page 17

Settings24Boiler sequence selection controlVitocontrol-S, VD2/CT3/CM2Actual boiler sequenceThe digits shown in the basic display show the boiler numbe

Page 18

Settings25Changing the heating patternVitocontrol-S, VD2/CT3/CM2The heating pattern of the boiler is influenced by the outdoor temperature andthe sett

Page 19

Settings26Changing the heating patternVitocontrol-S, VD2/CT3/CM2Changing the heating patternSlopeShift1. Open the hinged cover on the pro-gramming uni

Page 20

Settings27Changing the heating pattern(continued)Vitocontrol-S, VD2/CT3/CM2Change heating pattern if ... Action Example... not enough heat is generate

Page 21 - Settings

Scanning28Scanning temperatures and operating status informationVitotronic 100, GC1You can scan various actual temperatures and operating status infor

Page 22

Scanning29Scanning temperatures and operating status informationVitocontrol-S, VD2/CT3/CM2You can scan various actual temperatures and operating statu

Page 23 - Selecting the language

Index3PageUseful tipsIntroductory informationFor your safety 2, 4. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 24 - Boiler sequence

Troubleshooting guide30Special displaysVitocontrol-S, VD2/CT3/CM2MServiceMo °CPlease contact your heating contractorto arrange a service call.Remote c

Page 25 - Changing the heating pattern

Troubleshooting guide31Diagnosis and correctionVitotronic 100, GC1If a fault occurs on a boiler, it will be indicated in the display window and bythe

Page 26

Troubleshooting guide32Diagnosis and correctionVitotronic 100, GC1Burner does not switch on Heating program ”9” is set (thecorresponding button is ill

Page 27

Troubleshooting guide33Diagnosis and correctionVitocontrol-S, VD2/CT3/CM2If a fault occurs on the heating system, it will be indicated in the displayw

Page 28 - Scanning

Troubleshooting guide34Diagnosis and correction(continued)Vitocontrol-S, VD2/CT3/CM2Fault Cause RemedyHeating circuit does not start upHeatingsystemsw

Page 29

Troubleshooting guide35Diagnosis and correction(continued)Vitocontrol-S, VD2/CT3/CM2Fault Cause RemedyThe rooms are cold during the daybut warm at nig

Page 30 - Special displays

Viessmann Manufacturing Company Inc.750 McMurray RoadWaterloo, Ontario • N2V 2G5 • CanadaTel. (519) 885-6300 • Fax (519) 885-0887www.viessmann.ca • in

Page 31 - _1...38

Introductory information4For your safetyPlease ensure that this manual is read and understood before commencing installation. Failure to comply with t

Page 32 - Diagnosis and correction

Important Precautions5SafetyTake note of all symbols and notations intended to draw attention to potential hazards or important product information.Th

Page 33

Ready for operation6Overview of controls and indicatorsVitotronic 100, GC1Manual overrideChanging the boiler water temperature(without function in mul

Page 34

Ready for operation7Overview of controls and indicatorsVitocontrol-S, VD2/CT3/CM2Emissions test switch (see pg. 34)Heating circuit selector buttons (p

Page 35

Ready for operation8Overview of controls and indicators(continued)Vitocontrol-S, VD2/CT3/CM2Adjustment of the display windowcontrastOpen the hinged co

Page 36 - Quick Reference

Ready for operation9Your heating system is preset ...Vitocontrol-S, VD2/CT3/CM2The control units are preset in the factory to a standard operating mod

Commentaires sur ces manuels

Pas de commentaire