Viessmann ESS CHP Spécifications télécharger pdf (Page 21)

Subject to changes due to technical improvements ESS Energie Systeme & Service GmbH

CHP accessory range – 01/2010 21

5368 463

Heating

5.6 Recirculating air damper

5.6.1 Recirculating air damper in proled tting for EM-18/36

Article number CHP module type ESS Viessmann

EM-18/36 710-00-0030 7411175

Function The recirculating air damper is used for room heating with warm extract air. On a controller, any

temperature from 10 to 35 °C can be set. Subject to room temperature, the damper servomotor constantly

opens or closes the louvre damper to regulate the set temperature.

Please note: In Germany, in accordance with the occupational safety directive, extract air must not be

routed into workrooms or other rooms people have access to!

Please note: If installed upstream of the optional extract air damper, machine/fan noise in the installation

room will be without attenuation!

Version

Fig. 5 Connection of the recirculating air damper to a CHP module EM-18/36

1 Branch 90° ID 315 mm, length 500 mm

2 Shut-off damper ID 315 mm, length 250 mm

3 Female connections

4 Fixing clamps 315 mm

5 Damper servomotor

6 Control unit with temperature sensor

7 Flanged collar ID 315 mm (module connection)

8 Plain ange ID 315 mm (module connection)

9 Hose ID 315 mm, length 500 mm (exible connector)

10 Hose clip

• Pos. 7, 8 and 9 are part of the standard delivery of the CHP module

• Pos. 4 and 10 on site

• On-site requirements: 230 V supply

Delivery As loose accessories for on-site installation

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Pas de commentaire

Viessmann ESS CHP Spécifications Page 21