Viessmann FDVS-4 Spécifications télécharger pdf

FIELD DIRECT VENT SYSTEM

Model: FDVS

The Field Direct Vent System (FDVS) is a non-powered positive pressure side wall vent termination system for use only

with specifically listed oil fired appliances. The system provides an outlet for exhaust gases and an intake for combustion

air in a single concentric terminal. The FDVS termination is designed to direct the hot exhaust gases away from the

structure using the static pressure generated by a special oil burner. All of the internal parts in contact with the flue gases

are made from corrosion resistant 316L stainless steel. The FDVS, with its built-in combustion air tee, allows connecting

standard galvanized pipe from the FDVS termination to the air intake of a special oil burner or by use of a Field Controls

Airboot, depending on the model of the oil burner.

DO NOT DESTROY

THESE INSTRUCTIONS MUST REMAIN WITH EQUIPMENT

WARNING:

This system MUST be installed by a qualified agency in accordance with the manufacturer’s installation

instructions.

The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a

representative is engaged in, and is responsible for, the installation and operation of oil appliances, who is experienced in

such work, familiar with all the precautions required, and has complied with all the requirements of the authority having

jurisdiction.

WARNING:

• Read the installation instructions carefully and completely before proceeding with the installation.

• For continued safe operation, the appliance vent system combination is required to be inspected and maintained

annually by a qualified agency. Failure to properly maintain the appliance vent system combination can lead to

Death, Personal Injury and or Property Damage

WARNING:

1. Safety inspection of a venting system should be performed before and after installing a venting system on an existing

or new appliance. Procedures to follow are the latest version of those recommended by the National Fuel Gas Code,

ANSI Z223.1, UL-726, NFPA31, CSA B139, CSA B140.0.03 appliance manufacturer’s recommendations, or refer to

the General Installation Inspection section of this manual.

2. Plan the vent system layout before installation to avoid the possibility of accidental contact with concealed wiring or

plumbing inside walls.

Patent

Pending

ITEMS INCLUDED IN KIT:

FDVS Direct Vent Termination

*VRV-4 Vacuum Relief Valve

Backing Plate

Installation Instruction

Sheet

**Bagged Hardware

**Cover Ring

**Cover Sleeve

**Appliance Adapter

**Adapter Clamp

*Not included in some models

**Included with FOVP (Flex Oil Vent Pipe) for some models

1 2 3 4

Résumé du contenu

Page 1 - FIELD DIRECT VENT SYSTEM

FIELD DIRECT VENT SYSTEM Model: FDVS The Field Direct Vent System (FDVS) is a non-powered positive pressure side wall vent termination system for use

Page 2 - FDVS-6 9-1/4”

Page 2INSTALLATION OF FDVS DIRECT VENT SYSTEM INSTALLATION OF THE VENT TERMINATION 1. Remove vent system components from box and inspect for damage.

Page 3 - Figure 3 – Top View

Page 3INSTALLATION OF THE VENT TERMINATION COMBUSTION AIR TEE 1. Assemble the combustion air tee assembly body to the vent termination outer pipe, a

Page 4 - P/N 46483500 Rev C 12/05

Page 4Figure 4Figure 5FIELD CONTROLS DIRECT VENT SYSTEMS VENT PIPE ASSEMBLY APPLIANCE ADAPTER INSTALLATION: 1. Apply a bead of sealant to appliance

Plus de documents pour Non Viessmann FDVS-4

Voir le document Viessmann FDVS-4 Informations techniques

Viessmann FDVS-4 Informations techniques (8 pages)

Commentaires sur ces manuels

Pas de commentaire

Viessmann FDVS-4 Spécifications

Naviguer en ligne ou télécharger Spécifications pour Non Viessmann FDVS-4. Viessmann FDVS-4 Specifications Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Non Viessmann FDVS-4

Commentaires sur ces manuels

Produits connexes et manuels pour Non Viessmann FDVS-4