Viessmann Vitotronic 300 KW3 Instructions d'exploitation télécharger pdf (Page 16)

Time Program for Central Heating

Altering the Time Program for Central Heating (continued)

Individual heating cycles for each day of the week

1Time Prog. Central Htg.

1 --- 7

1Time Prog. Central Htg.

1. Open the hinged cover on the

programming unit. Select heating

circuit, activating

or or .

12.

for ”Central heating t ime

program”. Wait until the

display shown on the left

appears.

13.

/ to enter the day of the

week for which you

require a different time

program.

14.

for ”Heating cycle

1”.

15.

for ”Heating cycle 1

ON”.

16.

/ to enter t he start of the

cycle.

17.

to confirm; the display

changes to ”Heating

cycle 1 OFF” .

18.

/ to enter t he end of the

cycle.

19.

to confirm; the display

changes to ”Heating

cycle 2 ON”.

10. To set the start and end of heating

cycles 2 to 4, follow the procedure

described in points 6 and 9.

11. Close the hinged cover on the

programming unit.

To scan the heating cycle timer

Follow the procedure described above,

but without using the

and

buttons.

The heating cycles at a glance

1. Open the hinged cover on the

programming unit.

2. Press

and simultaneously; the

preset heating cycles for the current

day of the week appear on a time

slot graphic.

3. Close the hinged cover on the

programming unit.

If you wish to exit the time program

setting mode, press

again.

Press

to skip a timer cycle.

After you have confirmed the last

input with

, the display changes

and shows the boiler water

temperature.

5303 272 v1.3

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Viessmann Vitotronic 300 KW3 Instructions d'exploitation Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Chauffe-eau et chaudières Viessmann Vitotronic 300 KW3