Viessmann VITOCAL 222-G Fiche technique télécharger pdf (Page 59)

Note

To prevent damage to the connecting

cables with wall clearances of

> 80 mm, the connecting cables must

be provided with strain relief on site.

1. Fit the threaded ferrule at the back

of the equipment

2. Push the drain hose onto the

threaded ferrule and secure with a

hose clip.

3. Connect the drain outlet kit with the

on-site drain connection DN 40.

Installation instructions;

drain outlet kit

4. Push the drain hose into the drain

outlet kit.

5. Note

Min. clearance between the wall

and the back of the device 45 mm.

Push the compact unit against the

wall or into the recess.

Heat pump preparation

Please note

If the compressor is at a steep angle in the heat pump module, the intro-

duction of lubricant into the refrigerant circuit will damage the equipment.

The heat pump module must not be tilted by more than 30° during trans-

portation.

Fitting the water drain (Vitocal 222)

Installation sequence

5592 969 GB

Installation

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 235 236

Pas de commentaire

Viessmann VITOCAL 222-G Fiche technique Page 59