Viessmann KOB PYROT SERIES Manuel de service

Operation and Maintenance Instructions PYROT 100 to 540 ID: 106811-H English

106 The ECOTRONIC control system 6.1 General information The ECOTRONIC facility control system is a de-centralised microprocessor sys

116.3 Boiler and loader system (F3/F4) 6.3.1 The F3 KEY: "PYROT Parameters" (mask number) parameter (factory setting) (01) Storage unit

126.3.2 The F4 KEY: "PYROT Loader System" (mask number) parameter (factory setting) (01) Cleaning (NO): This activates the cleaning funct

136.4 Extended control systems F5 – F8 (op-tional) The F5 to F8 keys are assigned customer-specific extended control systems as desired. Each ex-ten

14¥Auto +5°C Point 1 -15°C Point 2 (Diagram: Heating Curve) eThe heating curve The correspondence of the flow temperature to the outdoor temperat

156.4.2 Utility water heater Function: - ECO-B1 When the temperature of the utility water drops, it is reheated by the built-in heat ex-changer fro

166.4.3 Air heater Function (ECO-L): The air heaters are supplied at maximum flow temperature from the boiler plant storage system. The fans are conn

176.4.4 Annex buildings Function (ECO-N): The pipeline is usually supplied with a lowered temperature required by the weather-guided heat-ing control

18The heating curve See "Extended control system for room heating unit" Room thermostat (ECO-ZR-QA): See "Extended control system for

196.4.6 Additional heat generator Function (ECO-KP1): The additional heat generator is automatically connected when required. This takes place afte

© by KÖB Holzfeuerungen GmbH Flotzbachstraße 33 A-6922 Wolfurt All rights reserved, including photomechanical reproduction and storage in electronic

206.4.7 Solar Function (ECO-S1): This is used in simple solar systems with a single control circuit to heat the utility water in the solar utility wa

217 Cleaning/Maintenance 7.1 Boiler Regular cleaning and maintenance of the facility is the customer's most important job for years of trouble-f

22 Exhaust gas deduster, detached (optional) IMPORTANT: Never operate the boiler without ash

237.1 Installing the displacement rods into the heat exchanger The displacement rods improve the heat transmis-sion in the heat exchanger and reduce

247.2 Feed systems All the geared motors on the feed systems are maintenance-free. - A change of lubricant and/or oil is recom-mended every 20,000

Spec Sheet Wood Fuels Minimum Requirements / Information KÖB Holzfeuerungen GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 6

Spec Sheet Wood Fuels Minimum Requirements / Information KÖB Holzfeuerungen GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 6

Malfunction report / malfunction remedy Pyrot ECO 2005-05-01_E Page 1 of 2 Heat Generation No. Text displayed for malfunc-tion Malfunction alarm

Malfunction report / malfunction remedy Pyrot ECO 2005-05-01_E Page 2 of 2 Loader System No. Text displayed for malfunc-tion Malfunction alarm

Leerseite für Notizen: Blank page for notes: Page en blanc pour des notationes:

1 General Information_________________________________________________ 4 1.1 Foreword _____________________________________________________________

Leerseite für Notizen: Blank page for notes: Page en blanc pour des notationes:

Leerseite für Notizen: Blank page for notes: Page en blanc pour des notationes:

KÖB Holzfeuerungen GmbH, Flotzbachstrasse 33, A-6922 Wolfurt Tel +43 55 74 / 67 70-0, Fax +43 55 74 / 65 7 07 [email protected], www.koeb-holzfeuer

41 General Information 1.1 Foreword Dear System Owner, you have made a good se-lection in the PYROT. It will provide you with all the advantages of a

52 Important Information 2.1 Safety instructions When carrying out work on the heating sys-tem, such as cleaning and maintenance, wear appropriate pr

62.4 A fire hazard With insertion-type firing systems, the conveying route creates a connection between the silo and the burning material in the bo

73 How the Boiler Plant is Strucured (Illustration: PYROT 300) (1) Feed auger with isolating layer (2) Drive for moving grate (3) Automatic

84 Commissioning/Operation 4.1 The initial start-up The initial start-up is carried out either by KÖB Holzfeuerungen GmbH or a competent individual

95 Oil burners on a Pyrot Be sure to note: - The oil burner's firing power may amount to a maximum of 70% of the